Click image to view full size image
It is applied to electric machinery and hydraulic equipment, the HRC is between 44 and 46 and the main material used are 65Mn, 50CrVA, 0Cr17Ni7AL, SUS304L and SUS316L.
Wave spring (flat wire compression spring) provides a unique advantage of space saving when used in place of a helical spring. By reducing the working height of the spring, the spring of the waveform spring also produces a decrease in the spring. Cost savings can be achieved by reducing the size of the device and reducing the material used in the manufacturing process.
Wave spring as load bearing equipment operation. They occupy the gap and change the size of the compensating device. In which the load is accumulated gradually or suddenly, it is possible to produce an unlimited range of strength to reach the predetermined working height. This establishes an accurate elastic ratio, in which the load is proportional to the deflection.
Dynamic and static spring applications require functional requirements. Special performance features are built into each spring to meet a variety of precise operating conditions. Typically, the waveform spring will occupy a very small workload area. The demand for this product is not limited to the use of tight axial and radial spaces.